600 watt transient voltage suppressor microsemi scottsdale division 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503 page 1 copyright ? 2005 8-04-2005 rev f www. microsemi . com scottsdale division p6ke6.8 thru 200ca, e3 p6ke6.8 thru 200a description appearance this p6ke series is an economical 600 w transient voltage suppressor (tvs) for protecting voltage-sensitiv e components from destruction or degradation. it is available in both unidirectional and bi-directional configurations as well as rohs compliant (annealed matte-tin finish) with an e3 suffix added to the part number. the response time of their cl amping action is virtually instantaneous. as a result, they may also be used effectively for protection from esd or eft per iec61000-4-2 and iec61000-4-4 or for inductive switching environments and induced rf. they can also be used for protecting other sensitive components from secondary lightning effects per iec61000-4-5 and class levels defined herein. microsemi also offers numerous other tvs products to meet higher and lower power demands and special applications. important: for the most current data, consult microsemi?s website: http://www.microsemi.com t-18 features applications / benefits ? available in both unidirectional and bidirectional (add c or ca suffix to part number for bidirectional) ? optional 100% screening for avionics grade is available by adding ma prefix to part number for added 100% temperature cycle -55 o c to +125 o c (10x) as well as surge (3x) and 24 hours htrb with post test v z & i r (in the operating direction for unidirectional or both directions for bidirectional) ? options for screening in accordance with mil-prf- 19500 for jan, jantx, jantxv, and jans are available by adding mq, mx, mv, or msp prefixes respectively to part numbers. ? surface mount equivalents available as smbjp6ke6.8 to smbjp6ke200ca or smbj5.0 to smbj170ca (consult factory for other surface mount options) ? moisture classification is level 1 with no dry pack required per ipc/jedec j-std-020b ? rohs compliant devices available by adding ?e3? suffix ? selections for 6.8 to 200 volts breakdown (v br ) ? economical tvs series for thru-hole mounting ? protects sensitive components such as ic?s, cmos, bipolar, bicmos, ecl, dtl, t 2 l, etc. ? protection from switching transients & induced rf ? compliant to iec61000-4-2 and iec61000-4-4 for esd and eft protection respectively ? secondary lightning protection per iec61000-4-5 with 42 ohms source impedance: class 1: p6ke6.8 to p6ke130a or ca class 2: p6ke6.8 to p6ke68a or ca class 3: p6ke6.8 to p6ke36a or ca class 4: p6ke6.8 to p6ke18a or ca ? secondary lightning protection per iec61000-4-5 with 12 ohms source impedance: class 1: p6ke6.8 to p6ke43a or ca class 2: p6ke6.8 to p6ke22a or ca maximum ratings mechanical and packaging ? peak pulse power dissipation at 25 o c: 600 watts at 10/1000 s (also see fig 1,2, and 3). ? impulse repetition rate (duty factor): 0.01% ? t clamping (0 volts to v (br) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional ? operating and storage temperature: -65 o c to +150 o c ? thermal resistance: 25 o c/w at 3/8 inch (10 mm) lead length from body, or 85 c/w junction to ambient when mounted on fr4 pc board with 4 mm 2 copper pads (1 oz) and track width 1 mm, length 25 mm ? steady-state power: 5 watts @ t l =25 o c 3/8 inch (10 mm) from body, or 1.47 w when mounted on fr4 pc board described for thermal resistance ? forward voltage at 25 o c: 3.5 volts maximum @ 100 amp peak impulse of 8.3 ms half-sine wave (unidirectional only) ? solder temperatures: 260 o c for 10 s (maximum) ? case: void-free transfer molded thermosetting epoxy body meeting ul94v-0 ? finish: tin-lead or rohs compliant annealed matte-tin plating readily solderable per mil-std- 750, method 2026 ? marking: body marked with part number ? polarity: band denotes cathode. bidirectional not marked ? weight: 0.7 grams (approximate) ? tape & reel option: standard per eia-296 (add ?tr? suffix to part number) ? see package dimensions on last page
600 watt transient voltage suppressor www. microsemi . com scottsdale division p6ke6.8 thru 200ca, e3 p6ke6.8 thru 200a electrical characteristics breakdown voltage v (br) min. nom. max. test current i (br) rated standoff voltage v wm max standby current i d @ v wm max clamping voltage v c @ i pp peak pulse current i pp temperature coefficiant of v (br) v(br) microsemi part number v dc v dc v dc ma v a v a % / o c p6ke6.8 p6ke6.8a p6ke7.5 p6ke7.5a 6.12 6.45 6.75 7.13 6.8 6.8 7.5 7.5 7.48 7.14 8.25 7.88 10 10 10 10 5.5 5.8 6.05 6.4 1000 1000 500 500 10.8 10.5 11.7 11.3 56 57 51 53 .057 .057 .061 .061 p6ke8.2 p6ke8.2a p6ke9.1 p6ke9.1a 7.38 7.79 8.19 8.65 8.2 8.2 9.1 9.1 9.02 8.61 10 9.55 10 10 1 1 6.63 7.02 7.37 7.78 200 200 50 50 12.5 12.1 13.8 13.4 48 50 44 45 .065 .065 .068 .068 p6ke10 p6ke10a p6ke11 p6ke11a 9.0 9.5 9.9 10.5 10 10 11 11 11 10.5 12.1 11.6 1 1 1 1 8.1 8.55 8.92 9.4 10 10 5 5 15 14.5 16.2 15.6 40 41 37 38 .073 .073 .075 .075 p6ke12 p6ke12a p6ke13 p6ke13a 10.8 11.4 11.7 12.4 12 12 13 13 13.2 12.6 14.3 13.7 1 1 1 1 9.72 10.2 10.5 11.1 5 5 5 5 17.3 16.7 19 18.2 35 36 32 33 .078 .078 .081 .081 p6ke15 p6ke15a p6ke16 p6ke16a 13.5 14.3 14.4 15.2 15 15 16 16 16.5 15.8 17.6 16.8 1 1 1 1 12.1 12.8 12.9 13.6 1 1 1 1 22 21.2 23.5 22.5 27 28 26 27 .084 .084 .086 .086 p6ke18 p6ke18a p6ke20 p6ke20a 16.2 17.1 18 19 18 18 20 20 19.8 18.9 22 21 1 1 1 1 14.5 15.3 16.2 17.1 1 1 1 1 26.5 25.2 29.1 27.7 23 24 21 22 .088 .088 .090 .090 p6ke22 p6ke22a p6ke24 p6ke24a 19.8 20.9 21.6 22.8 22 22 24 24 24.2 23.1 26.4 25.2 1 1 1 1 17.8 18.8 19.4 20.5 1 1 1 1 31.9 30.6 34.7 33.2 19 20 17 18 .092 .092 .094 .094 p6ke27 p6ke27a p6ke30 p6ke30a 24.3 25.7 27 28.5 27 27 30 30 29.7 28.4 33 31.5 1 1 1 1 21.8 23.1 24.3 25.6 1 1 1 1 39.1 37.5 43.5 41.4 15 16 14 14.4 .096 .096 .097 .097 p6ke33 p6ke33a p6ke36 p6ke36a 29.7 31.4 32.4 34.2 33 33 36 36 36.3 34.7 39.6 37.8 1 1 1 1 26.8 28.2 29.1 30.8 1 1 1 1 47.7 45.7 52 49.9 12.6 13.2 11.6 12 .098 .098 .099 .099 p6ke39 p6ke39a p6ke43 p6ke43a 35.1 37.1 38.7 40.9 39 39 43 43 42.9 41 47.3 45.2 1 1 1 1 31.6 33.3 34.8 36.8 1 1 1 1 56.4 53.9 61.9 59.3 10.6 11.2 9.6 10.1 .100 .100 .101 .101 p6ke47 p6ke47a p6ke51 p6ke51a 42.3 44.7 45.9 48.5 47 47 51 51 51.7 49.4 56.1 53.6 1 1 1 1 38.1 40.2 41.3 43.6 1 1 1 1 67.8 64.8 73.5 70.1 8.8 9.3 8.2 8.6 .101 .101 .102 .102 p6ke56 p6ke56a p6ke62 p6ke62a 50.4 53.2 55.8 58.9 56 56 62 62 61.6 58.8 68.2 65.1 1 1 1 1 45.4 47.8 50.2 53 1 1 1 1 80.5 77 89 85 7.4 7.8 6.8 7.1 .103 .103 .104 .104 p6ke68 p6ke68a p6ke75 p6ke75a 61.2 64.6 67.5 71.3 68 68 75 75 74.8 71.4 82.5 78.8 1 1 1 1 55.1 58.1 60.7 64.1 1 1 1 1 98 92 108 103 6.1 6.5 5.5 5.8 .104 .104 .105 .105 p6ke82 p6ke82a p6ke91 p6ke91a 73.8 77.9 81.9 86.5 82 82 91 91 90.2 86.1 100 95.5 1 1 1 1 66.4 70.1 73.7 77.8 1 1 1 1 118 113 131 125 5.1 5.3 4.5 4.8 .105 .105 .106 .106 microsemi scottsdale division page 2 copyright ? 2005 8-04-2005 rev f 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
600 watt transient voltage suppressor www. microsemi . com scottsdale division p6ke6.8 thru 200ca, e3 p6ke6.8 thru 200a breakdown voltage v (br) min. nom. max. test current i (br) rated standoff voltage v wm max standby current i d @ v wm max clamping voltage v c @ i pp peak pulse current i pp temperature coefficiant of v (br) v(br) microsemi part number v dc v dc v dc ma v a v a % / o c p6ke100 p6ke100a p6ke110 p6ke110a 90 95 99 105 100 100 110 110 110 105 121 116 1 1 1 1 81 85.5 89.2 94 1 1 1 1 144 137 158 152 4.2 4.4 3.8 3.4 .106 .106 .107 .107 p6ke120 p6ke120a p6ke130 p6ke130a 108 114 117 124 120 120 130 130 132 126 143 137 1 1 1 1 97.2 102 105 111 1 1 1 1 173 165 187 179 3.5 3.6 3.2 3.3 .107 .107 .107 .107 p6ke150 p6ke150a p6ke160 p6ke160a 135 143 144 152 150 150 160 160 165 158 176 168 1 1 1 1 121 128 130 136 1 1 1 1 215 207 230 219 2.8 2.9 2.6 2.7 .108 .108 .108 .108 p6ke170 p6ke170a p6ke180 p6ke180a 153 161 162 171 170 170 180 180 187 179 198 189 1 1 1 1 138 145 146 154 1 1 1 1 244 234 258 246 2.5 2.6 2.3 2.4 .108 .108 .108 .108 p6ke200 p6ke200a 180 190 200 200 220 210 1 1 162 171 1 1 287 274 2.1 2.2 .108 .108 consult factory for higher voltages. for bidirectional construction, indicate a c or ca suffix after part number, i.e. p6ke200ca. capacitance will be o ne-half that shown in figure 4. symbols & definitions symbol definition symbol definition v wm working peak (standoff) voltage i pp peak pulse current p pp peak pulse power v c clamping voltage v (br) breakdown voltage i (br) breakdown current for v (br) i d standby current graphs 50 30 10 5.0 3.0 2.0 1.0 0.5 0.3 0.2 0.1 p pp ? peak pulse power ? kw t l = 25 o c 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 1000 10,000 test waveform parameters: tr=10 s, tw=1000 s tw ? pulse width - s figure 2 figure 1 pulse waveform for microsemi scottsdale division page 3 peak pulse power vs. pulse time exponential surge copyright ? 2005 8-04-2005 rev f 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
600 watt transient voltage suppressor www. microsemi . com scottsdale division p6ke6.8 thru 200ca, e3 p6ke6.8 thru 200a c ? capacitance - picofarads t l lead temperature o c v (br) - breakdown voltage ? volts peak pulse power ( p pp ) or continuous power i n p ercent of 25 o c rating figure 3 - derating curve figure 4 - p6ke typical capacitance vs. breakdown voltage package dimensions t-18 microsemi scottsdale division page 4 copyright ? 2005 8-04-2005 rev f 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
|
